CISCO-WAN-AXIPOP-MIB :: frChanUpcEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBfrChanUpcEnable

frChanUpcEnable

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::frChanUpcEnable

OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.1.1.69

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is added for FRSM12 card.

This object when disabled, disables Frame Relay policing.

This object is not applicable to MGX Release 1.x.

What is frChanUpcEnable?

This read-write enumeration (enable(1), disable(2)), added for the FRSM12 card, controls Frame Relay policing on the connection; disabling it turns off UPC/policing entirely for that channel, and it does not apply to MGX Release 1.x. An administrator disables this on a connection where policing enforcement needs to be temporarily suspended, such as during a controlled test of oversubscribed traffic. For example, disabling frChanUpcEnable on an FRSM12 channel would allow that connection's traffic to pass without being policed against its CIR/EIR contract, unlike a channel where policing remains enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.69
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::frChanUpcEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.69.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::frChanUpcEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.69.1 i <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::frChanUpcEnable OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.1frameRelayBASIS-MIB
1.3.6.1.4.1.351.110.5.1.2frChanBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.1.2.1frChanCnfGrpCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.2.1.1frChanCnfGrpTableCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.2.1.1.1frChanCnfGrpEntryCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.2.1.1.1.69frChanUpcEnableCISCO-WAN-AXIPOP-MIB