CISCO-WAN-AXIPOP-MIB :: endLineNum

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBendLineNum

endLineNum

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::endLineNum

OID (numeric): 1.3.6.1.4.1.351.110.5.1.3.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Refers to the physical line index. Note that the actual range of endLineNum supported by a card depends on the type of card. eg: FRSM-4T1/E1 supports a range from 1..4 (4 entries) FRSM-8T1/E1 supports a range from 1..8 (8 entries) FRSM-T3/E3/HS2 supports a range from 1..2 (2 entries) FRSM-2CT3 supports a range from 1..56 (56 entries) For FRSM12 Card: The ifIndex of the physical line on which this channel is provisioned.

What is endLineNum?

This read-only integer is the physical line index this endpoint is provisioned on, with a card-dependent range: 1-4 on FRSM-4T1/E1, 1-8 on FRSM-8T1/E1, 1-2 on FRSM-T3/E3/HS2, and 1-56 on FRSM-2CT3; on FRSM12 it is instead the ifIndex of the physical line. An administrator reads this to identify exactly which physical line, out of potentially many on a dense card like FRSM-2CT3, hosts this connection's endpoint. For example, on an FRSM-2CT3 card endLineNum can range up to 56, reflecting that card's much higher physical line density compared to the 4-line maximum on an FRSM-4T1/E1 card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.3.1.1.4
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::endLineNum

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.3.1.1.4.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::endLineNum.1

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::endLineNum OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.1frameRelayBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.1.3frEndPtMapGrpCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.3.1frEndPtMapGrpTableCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.3.1.1frEndPtMapGrpEntryCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.3.1.1.4endLineNumCISCO-WAN-AXIPOP-MIB