All MIBs › CISCO-WAN-AXIPOP-MIB › cir
cir
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::cir
OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The default value is 2400 cir defines committed information rate cir is in bits per second Maximum value for cir for an E1 card is 2048000 and for a T1 card is 1536000. cir has to be less than or equal to the port speed. Maximum value for cir for an E3 card is 34368000, for a T3 card is 44736000m, and for HSSI it is 52000000. Note that for FRSM-2CT3 card, the peak value of permissible CIR is 1536000. Maximum value for FRSM-HS2B-12IN1 is 10240000 Any value from 1 to 2399 will be rounded off to 2400. For FRSM12 Card: The range is 0-44736000 bps for T3, and The range is 0-34368000 bps for E3. cir can be 0 only for chanServType of uBR.
What is cir?
This read-write integer defines the Committed Information Rate in bits per second, defaulting to 2400 and bounded by port type: up to 2,048,000 bps on an E1 card, 1,536,000 bps on a T1 card, 34,368,000 bps on an E3 card, 44,736,000 bps on a T3 card, and 52,000,000 bps on HSSI, with a special peak of 1,536,000 bps on the FRSM-2CT3 card and 10,240,000 bps on the FRSM-HS2B-12IN1 card, always capped at the port speed. An administrator sets cir to guarantee a connection's baseline committed bandwidth, sizing it according to which physical card type the connection rides on. For example, provisioning a PVC on a T1 card, an engineer could not configure cir above 1,536,000 bps even though the same value would be legal on an E3 card supporting rates up to 34,368,000 bps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.13 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.13.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.13.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::cir OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1 | frameRelay | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1.2 | frChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.1.2.1 | frChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1 | frChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1 | frChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1.13 | cir | CISCO-WAN-AXIPOP-MIB |