All MIBs › CISCO-WAN-AXIPOP-MIB › chanServiceRate
chanServiceRate
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::chanServiceRate
OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.1.1.57
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the rate to which IR can be set to when chanServiceRateOverride is set to enabled. If chanServiceRateOverride is disabled then this object does not have any significance. For FRSM-8P, this is defined in fastpackets/sec. For FRSM-VHS, this is defined in atm cells per second. For VHS the range in cells per second will be 10 to 400000 cps.
For FRSM12 Card: Not Supported
What is chanServiceRate?
This read-write integer (160..6400000) sets the rate the SAR's information rate is programmed to when chanServiceRateOverride is enabled, expressed in fastpackets per second on FRSM-8P cards but in ATM cells per second (10 to 400,000 cps) on FRSM-VHS cards; when chanServiceRateOverride is disabled this object has no effect, and it is not supported on FRSM12. An administrator configures chanServiceRate to manually fix the connection's service rate instead of letting ForeSight manage it dynamically. For example, on an FRSM-VHS card with chanServiceRateOverride enabled, setting chanServiceRate to 200,000 cps would program the SAR to that fixed cell rate rather than the fastpackets-per-second units used on an FRSM-8P card.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.57 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::chanServiceRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.57.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::chanServiceRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.57.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::chanServiceRate OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1 | frameRelay | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1.2 | frChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.1.2.1 | frChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1 | frChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1 | frChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1.57 | chanServiceRate | CISCO-WAN-AXIPOP-MIB |