All MIBs › CISCO-WAN-AXIPOP-MIB › chanNum
chanNum
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::chanNum
OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Refers to the virtual connection index Note that the actual range of the index supported by a card depends on the type of card. eg: FRSM-4T1/E1 supports a range from 16..271 (256 entries) FRSM-8T1/E1 supports a range from 16..1015 (1000 entries) FRSM-T3/E3/HS2/HS2B-HSSI/T3B/E3B supports a range from 16..2015 (2000 entries) FRSM-2CT3/HS2B-12IN1 supports a range from 16..4015 (4000 entries) For FRSM12 Card: Byte 3 = Chassis Number, Byte 2 = Slot Number, Byte 1 & 0 = channel Number. Lower two bytes range from 16..16015 (16000 entries)
What is chanNum?
This read-only value identifies the virtual connection (channel) index on a Frame Relay Service Module, with the valid range varying dramatically by the specific FRSM card model: 16 through 271 (256 entries) on FRSM-4T1/E1, up to 16 through 1015 on FRSM-8T1/E1, up to 16 through 2015 on the FRSM-T3/E3/HS2 family, and up to 16 through 4015 (4000 entries) on FRSM-2CT3/HS2B-12IN1. An administrator must know the specific FRSM card variant installed before interpreting this value, since the same channel number could be valid on a high-capacity card but out of range on a smaller one. For example, a chanNum of 3000 would only be valid on an FRSM-2CT3/HS2B-12IN1 card, since even the FRSM-T3/E3/HS2 family tops out at 2015.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.1 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::chanNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.1.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::chanNum.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::chanNum OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1 | frameRelay | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1.2 | frChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.1.2.1 | frChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1 | frChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1 | frChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1.1 | chanNum | CISCO-WAN-AXIPOP-MIB |