All MIBs › CISCO-WAN-AXIPOP-MIB › cesmConnFGCRAEnable
cesmConnFGCRAEnable
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::cesmConnFGCRAEnable
OID (numeric): 1.3.6.1.4.1.351.110.5.3.2.1.1.1.46
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: enables/disables Frame based GCRA (early packet discard). This is not applicable to CESM-8T1/E1/T3/E3.
What is cesmConnFGCRAEnable?
This read-write value enables or disables Frame-based Generic Cell Rate Algorithm policing, which performs early packet discard at the frame level rather than the cell level, though it is not applicable to CESM-8T1/E1/T3/E3. An administrator on a card type where FGCRA applies would enable it to have the switch drop an entire non-conforming frame's worth of cells early rather than partially transmitting cells that will ultimately be incomplete at the far end. On CESM-8T1/E1/T3/E3 circuit-emulation channels, which don't carry frame-based traffic, this setting is not applicable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.46 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cesmConnFGCRAEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.46.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cesmConnFGCRAEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.46.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cesmConnFGCRAEnable.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::cesmConnFGCRAEnable OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.3 | circuitEmulation | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.3.2 | cesmChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.3.2.1 | cesmChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.3.2.1.1 | cesmChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1 | cesmChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.46 | cesmConnFGCRAEnable | CISCO-WAN-AXIPOP-MIB |