All MIBs › CISCO-WAN-AXIPOP-MIB › cesChanStrauSciNum
cesChanStrauSciNum
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::cesChanStrauSciNum
OID (numeric): 1.3.6.1.4.1.351.110.5.3.2.1.1.1.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates the type of connection. 1 = Normal Channel (nonStrauChannel(0) ) 2 = SCI 1 i.e bit 1 & 2 3 = SCI 2 i.e bit 3 & 4 4 = SCI 3 i.e bit 5 & 6 5 = SCI 4 i.e bit 7 & 8 Currently not supported in CESM-8 Not applicable for CESM-4 and CESM-T3/E3
What is cesChanStrauSciNum?
This read-write value indicates whether this channel is a normal (non-STRAU) channel or one of four sub-channel-interval (SCI) positions within a STRAU subrate timeslot, identifying which specific 2-bit group of an 8kbps subrate link the channel represents. An administrator provisioning subrate voice/data circuits below a full DS0 uses this to assign the channel to the correct SCI position, though this feature is not currently supported on CESM-8 and does not apply to CESM-4 or CESM-T3/E3 at all. For example, sci2(3) would designate the channel as occupying bits 3 and 4 of the shared DS0 timeslot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.19 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cesChanStrauSciNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.19.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cesChanStrauSciNum.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.19.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::cesChanStrauSciNum OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.3 | circuitEmulation | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.3.2 | cesmChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.3.2.1 | cesmChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.3.2.1.1 | cesmChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1 | cesmChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.19 | cesChanStrauSciNum | CISCO-WAN-AXIPOP-MIB |