CISCO-WAN-AXIPOP-MIB :: cesChanIdleSignalCode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBcesChanIdleSignalCode

cesChanIdleSignalCode

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::cesChanIdleSignalCode

OID (numeric): 1.3.6.1.4.1.351.110.5.3.2.1.1.1.21

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When cesChanIdleDetEnable = enableIdlePatternDet 3. This object will carry value 0..0xff and this will indicate Idle pattern in DS0 time slots. Only applicable to CESM-8P and not supported in this release.

What is cesChanIdleSignalCode?

This read-write value specifies the specific bit pattern, from 0 to 0xff, that the channel treats as an idle payload code in its DS0 timeslots when cesChanIdleDetEnable is set to enableIdlePatternDet(3), though this feature is not supported in the current release for CESM-8P. An administrator would configure this to match the specific idle-code convention used by the connected voice equipment once the feature becomes supported. Because it is explicitly not supported in this release, setting it currently has no operational effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.21
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cesChanIdleSignalCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.21.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cesChanIdleSignalCode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.21.1 i <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::cesChanIdleSignalCode OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.3circuitEmulationBASIS-MIB
1.3.6.1.4.1.351.110.5.3.2cesmChanBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.3.2.1cesmChanCnfGrpCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.3.2.1.1cesmChanCnfGrpTableCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.3.2.1.1.1cesmChanCnfGrpEntryCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.3.2.1.1.1.21cesChanIdleSignalCodeCISCO-WAN-AXIPOP-MIB