All MIBs › CISCO-WAN-AXIPOP-MIB › cesCas
cesCas
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::cesCas
OID (numeric): 1.3.6.1.4.1.351.110.5.3.2.1.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies if CAS bits are carried by the service. This also selects which AAL1 format should be used. Only basic mode is supported for unstructured connections Only basic mode is supported in CESM-4P and CESM-T3E3 . If type is ccs then this particular VC is carrying Signaling information. ccs option is not supported in CESM-8T1E1. In CESM-8T1/E1 all channels on a line should have the same value. basicNoPointer should be used for adding 1x64 basic connections without an AAL1 pointer ( CES-IS 2.0 compliance ). when cesCas = basic, for 1x64 connections, cells will be generated with a AAL1 pointer.Similarly while receiving, pointer will be expected in the incoming cells. ds1SfCasMF and ds1EsfCasMF should be used when line level multiframe sync to be enabled.
What is cesCas?
This read-write value selects which Channel Associated Signalling format, if any, the circuit emulation channel carries, ranging from plain basic mode through various T1/E1 CAS framing variants to CCS mode, which designates the channel as carrying signalling information for other channels on the same line. An administrator restricted to CESM-4P or CESM-T3/E3 can only use basic mode, and on CESM-8T1/E1 every channel sharing a line must be configured with the same CAS value. For example, setting cesCas to ccs(5) on a CESM-8T1/E1 line dedicates that particular VC to carrying signalling for the other channels sharing the line, a mode explicitly unavailable on CESM-8T1E1 per the description's exclusion.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.8 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cesCas
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.8.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::cesCas.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.3.2.1.1.1.8.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::cesCas OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.3 | circuitEmulation | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.3.2 | cesmChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.3.2.1 | cesmChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.3.2.1.1 | cesmChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1 | cesmChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.3.2.1.1.1.8 | cesCas | CISCO-WAN-AXIPOP-MIB |