All MIBs › CISCO-WAN-AXIPOP-MIB › bertPort
bertPort
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::bertPort
OID (numeric): 1.3.6.1.4.1.351.110.6.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: specifies the port number for BERT.
What is bertPort?
This read-write object specifies the port number to be used for the BERT test. It is meaningful only when bertTestMedium is set to port, pinpointing exactly which port on the selected slot the test will run against. An admin narrowing down a noisy channel would set this to the specific port number suspected of carrying errors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.8 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bertPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.8.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bertPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.6.1.8.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::bertPort OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6 | axisDiagnostics | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.6.1 | bert | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.6.1.8 | bertPort | CISCO-WAN-AXIPOP-MIB |