CISCO-WAN-AXIPOP-MIB :: bertDS0Speed

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBbertDS0Speed

bertDS0Speed

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::bertDS0Speed

OID (numeric): 1.3.6.1.4.1.351.110.6.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: represents the ds0 speed of the test running.

What is bertDS0Speed?

This read-only object reports the DS0 speed -- 56k or 64k -- of the BERT test currently running. It reflects the actual configured channel speed being tested rather than something the admin sets directly for this object. An admin verifying a DS0 was tested at the intended speed, such as confirming a 56k circuit wasn't mistakenly tested at 64k, would check this value during or after the test.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.16
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bertDS0Speed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.16.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bertDS0Speed.1

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::bertDS0Speed OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.6axisDiagnosticsBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.6.1bertCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.6.1.16bertDS0SpeedCISCO-WAN-AXIPOP-MIB