All MIBs › CISCO-WAN-AXIPOP-MIB › bertBitCount
bertBitCount
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::bertBitCount
OID (numeric): 1.3.6.1.4.1.351.110.6.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This shows the number of bits transmitted.
What is bertBitCount?
This read-only object reports the total number of bits transmitted so far during the current BERT test. It is the denominator an admin uses, together with bertBitErrorCount, to calculate the bit error rate for the test in progress. An admin monitoring a long-running overnight BERT test would periodically check this counter to confirm the test is still actively transmitting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.20 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bertBitCount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.20.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bertBitCount.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::bertBitCount OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6 | axisDiagnostics | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.6.1 | bert | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.6.1.20 | bertBitCount | CISCO-WAN-AXIPOP-MIB |