All MIBs › CISCO-WAN-AXIPOP-MIB › bbRemoteConnSCR
bbRemoteConnSCR
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::bbRemoteConnSCR
OID (numeric): 1.3.6.1.4.1.351.110.5.2.7.1.1.1.51
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sustained cell rate of the other end, if not set, will be set to the same as local end SCR (bbChanUpcSCR). However, note that if the PCRs for both local and remote end are set to the different value (i.e., asymmetric conn), then this should be set differently from local end SCR.
What is bbRemoteConnSCR?
This read-write value sets the Sustained Cell Rate for the remote end of the connection, defaulting to the local end's SCR, bbChanUpcSCR, unless explicitly configured otherwise for an asymmetric connection. It's the sustained-rate counterpart to bbRemoteConnPCR, letting the far end's average-rate contract differ from the near end's when traffic isn't symmetric. Configuring bbRemoteConnSCR distinctly from bbChanUpcSCR is exactly what an admin would do for a connection with deliberately asymmetric average bandwidth in each direction.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.7.1.1.1.51 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bbRemoteConnSCR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.7.1.1.1.51.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bbRemoteConnSCR.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.7.1.1.1.51.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::bbRemoteConnSCR OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.7 | bbChan | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.7.1 | bbChanCnfGrp | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.7.1.1 | bbChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.7.1.1.1 | bbChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.7.1.1.1.51 | bbRemoteConnSCR | CISCO-WAN-AXIPOP-MIB |