CISCO-WAN-AXIPOP-MIB :: bbIfIlmiEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBbbIfIlmiEnable

bbIfIlmiEnable

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::bbIfIlmiEnable

OID (numeric): 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The logical interface is a generic entity, it can be used as either a virtual trunk, or user port with UNI support.

This variable is provided to enable/disable ILMI.

ILMI should only be enabled on 'user ports' and not on 'virtual trunks' 1 - disable 2 - enable

What is bbIfIlmiEnable?

This read-write setting turns ILMI, the Interim Local Management Interface, on or off for this logical interface, and per the description should be enabled only on user ports, not on virtual trunks. ILMI is used for address registration and status exchange with UNI-attached devices, so enabling it inappropriately on a trunk could cause unwanted signaling behavior. An admin provisioning a customer-facing UNI port would set bbIfIlmiEnable to enable(2), while leaving it disabled on an inter-switch virtual trunk.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bbIfIlmiEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bbIfIlmiEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2.1 i <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::bbIfIlmiEnable OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.2atmBASIS-MIB
1.3.6.1.4.1.351.110.5.2.6bbInterfaceBASIS-MIB
1.3.6.1.4.1.351.110.5.2.6.1bbIfCnfBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.2.6.1.2bbIfCnfSigILMIGrpCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.2.6.1.2.1bbIfCnfSigILMIGrpTableCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1bbIfCnfSigILMIGrpEntryCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2bbIfIlmiEnableCISCO-WAN-AXIPOP-MIB