All MIBs › CISCO-WAN-AXIPOP-MIB › bbChanTestTypeCPESide
bbChanTestTypeCPESide
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::bbChanTestTypeCPESide
OID (numeric): 1.3.6.1.4.1.351.110.5.2.7.1.1.1.43
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The default is notest.
The chanTestType starts testing the segment continuity of a connection. It sends OAM Segment loopback cell towards port side (CPE) The CPE would loop back the cell To test the continuity follow this procedure: a- set chanTestTypeCPEside to testconseg b- read chanTestState till it is Pass or Fail
*Note that the chanTestType would go back to notest when the test is completed
SYNTAX When you select testdelay
This is the type of the test 1 = Test Continuity 2 = No Test
What is bbChanTestTypeCPESide?
This read-write control triggers a segment continuity test toward the CPE, port, side of this connection by writing testconseg(1), sending an OAM segment loopback cell that the CPE is expected to loop back; notest(2) is the default idle state. Unlike bbChanTestType's end-to-end AXIS or BPX-oriented test, this specifically checks connectivity to the customer-facing segment only. An admin isolating whether a fault is on the CPE-facing segment versus deeper in the network would use bbChanTestTypeCPESide rather than the full end-to-end continuity test.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.7.1.1.1.43 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bbChanTestTypeCPESide
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.7.1.1.1.43.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bbChanTestTypeCPESide.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.7.1.1.1.43.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> bbChanTestTypeCPESide.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::bbChanTestTypeCPESide OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.7 | bbChan | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.7.1 | bbChanCnfGrp | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.7.1.1 | bbChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.7.1.1.1 | bbChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.7.1.1.1.43 | bbChanTestTypeCPESide | CISCO-WAN-AXIPOP-MIB |