All MIBs › CISCO-VOICE-DIAL-CONTROL-MIB › cvVoicePeerCfgEchoCancellerTest
cvVoicePeerCfgEchoCancellerTest
Module: CISCO-VOICE-DIAL-CONTROL-MIB
OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgEchoCancellerTest
OID (numeric): 1.3.6.1.4.1.9.9.63.1.2.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies which, if any, test to run in the echo canceller when a call from the network is connected. echoCancellerTestNone - do not run a test. echoCancellerG168Test2A - run ITU-T G.168 Test 2A. echoCancellerG168Test2B - run ITU-T G.168 Test 2B. echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a). echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b). echoCancellerG168Test3A - run ITU-T G.168 Test 3A. echoCancellerG168Test3B - run ITU-T G.168 Test 3B. echoCancellerG168Test3C - run ITU-T G.168 Test 3C. echoCancellerG168Test4 - run ITU-T G.168 Test 4. echoCancellerG168Test5 - run ITU-T G.168 Test 5. echoCancellerG168Test6 - run ITU-T G.168 Test 6. echoCancellerG168Test7 - run ITU-T G.168 Test 7. echoCancellerG168Test9 - run ITU-T G.168 Test 9.
What is cvVoicePeerCfgEchoCancellerTest?
This is a read-write enumerated setting choosing which standardized echo-canceller test, such as an ITU-T G.168 test variant, to run automatically whenever a call from the network connects on this peer, or none at all. An admin enables a specific test to proactively validate that the echo canceller hardware is performing correctly according to industry test procedures, which helps catch degraded echo-cancellation hardware before it causes user-audible echo complaints. For example, a technician troubleshooting persistent echo on a particular trunk might enable one of the G.168 test options on the peer to run a standardized diagnostic against the echo canceller.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.2.1.7 snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgEchoCancellerTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.2.1.7.1 snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgEchoCancellerTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.2.2.1.7.1 i <value>
Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgEchoCancellerTest OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.63 | ciscoVoiceDialControlMIB | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1 | cvdcMIBObjects | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2 | cvPeer | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.2 | cvVoicePeerCfgTable | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.2.1 | cvVoicePeerCfgEntry | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.2.1.7 | cvVoicePeerCfgEchoCancellerTest | CISCO-VOICE-DIAL-CONTROL-MIB |