CISCO-VOICE-DIAL-CONTROL-MIB :: cvVoIPPeerCfgPoorQoVNotificationEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvVoIPPeerCfgPoorQoVNotificationEnable

cvVoIPPeerCfgPoorQoVNotificationEnable

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgPoorQoVNotificationEnable

OID (numeric): 1.3.6.1.4.1.9.9.63.1.2.3.1.10

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether cvdcPoorQoVNotification (or the newer cvdcPoorQoVNotificationRev1) traps should be generated for the call that is associated with this peer.

What is cvVoIPPeerCfgPoorQoVNotificationEnable?

This is a read-write true/false setting that enables poor-quality-of-voice traps specifically for calls associated with this individual VoIP peer, complementing the gateway-wide cvGeneralPoorQoVNotificationEnable object. An admin uses this to fine-tune poor-quality alerting on a per-peer basis rather than turning it on or off for the entire gateway at once. For example, an admin might enable this only on peers serving critical business lines while leaving it disabled on lower-priority peers to reduce alert noise.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.10
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgPoorQoVNotificationEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.10.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgPoorQoVNotificationEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.10.1 s <value>

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgPoorQoVNotificationEnable OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2cvPeerCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3cvVoIPPeerCfgTableCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3.1cvVoIPPeerCfgEntryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3.1.10cvVoIPPeerCfgPoorQoVNotificationEnableCISCO-VOICE-DIAL-CONTROL-MIB