CISCO-VOICE-DIAL-CONTROL-MIB :: cvVoIPPeerCfgMediaPolicyNotificationEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvVoIPPeerCfgMediaPolicyNotificationEnable

cvVoIPPeerCfgMediaPolicyNotificationEnable

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgMediaPolicyNotificationEnable

OID (numeric): 1.3.6.1.4.1.9.9.63.1.2.3.1.35

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether cvdcPolicyViolationNotification traps should be generated for the call that is associated with this peer for Media policing feature..

What is cvVoIPPeerCfgMediaPolicyNotificationEnable?

This is a read-write true/false setting that enables cvdcPolicyViolationNotification traps for this specific peer when a media policing violation occurs. An admin uses this per-peer control to focus media-policy alerting on the peers where it matters most, rather than enabling it gateway-wide. For example, an admin might enable this only on SIP trunk peers connecting to less-trusted third-party carriers, where enforcing media policy compliance is more important.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.35
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgMediaPolicyNotificationEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.35.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgMediaPolicyNotificationEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.35.1 s <value>

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgMediaPolicyNotificationEnable OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2cvPeerCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3cvVoIPPeerCfgTableCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3.1cvVoIPPeerCfgEntryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3.1.35cvVoIPPeerCfgMediaPolicyNotificationEnableCISCO-VOICE-DIAL-CONTROL-MIB