CISCO-VOICE-DIAL-CONTROL-MIB :: cvVoIPPeerCfgDSCPPolicyNotificationEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvVoIPPeerCfgDSCPPolicyNotificationEnable

cvVoIPPeerCfgDSCPPolicyNotificationEnable

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDSCPPolicyNotificationEnable

OID (numeric): 1.3.6.1.4.1.9.9.63.1.2.3.1.34

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether cvdcPolicyViolationNotification traps should be generated for the call that is associated with this peer for RPH to DSCP mapping and policing feature.

What is cvVoIPPeerCfgDSCPPolicyNotificationEnable?

This is a read-write true/false setting that enables cvdcPolicyViolationNotification traps specifically for calls associated with this peer when an RPH-to-DSCP mapping and policing violation occurs. An admin uses this to fine-tune RPH/DSCP policy alerting on individual peers rather than only at the gateway-wide level controlled by cvGeneralDSCPPolicyNotificationEnable. For example, an admin might enable this only on peers carrying precedence-marked government or emergency traffic where RPH-to-DSCP compliance is critical.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.34
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDSCPPolicyNotificationEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.34.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDSCPPolicyNotificationEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.34.1 s <value>

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDSCPPolicyNotificationEnable OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2cvPeerCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3cvVoIPPeerCfgTableCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3.1cvVoIPPeerCfgEntryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3.1.34cvVoIPPeerCfgDSCPPolicyNotificationEnableCISCO-VOICE-DIAL-CONTROL-MIB