CISCO-VOICE-DIAL-CONTROL-MIB :: cvVoIPPeerCfgBitRates

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvVoIPPeerCfgBitRates

cvVoIPPeerCfgBitRates

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgBitRates

OID (numeric): 1.3.6.1.4.1.9.9.63.1.2.3.1.28

Node type: OBJECT-TYPE

Type: CvAmrNbBitRateMode

Access: read-write

Description: This object indicates modes of Bit rates. One or more upto four modes can be configured at the same time as bit rates can be changed dynamically for AMR-NB codec. This object is not instantiated when the object cvVoIPPeerCfgCoderRate is not equal to gsmAmrNb enum.

What is cvVoIPPeerCfgBitRates?

This is a read-write setting that configures which AMR-NB bit-rate modes, up to four at once, are allowed for this peer, since AMR-NB can change bit rates dynamically during a call, and like the octet-aligned object it is only instantiated when the coder is set to AMR-NB. An admin uses this to control the range of bandwidth and quality tradeoffs the AMR-NB codec is permitted to adapt between on this peer's calls. For example, an admin might restrict this to only the higher bit-rate modes on a peer where voice quality matters more than conserving bandwidth.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.28
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgBitRates

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.28.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgBitRates.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.2.3.1.28.1 s <value>

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgBitRates OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2cvPeerCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3cvVoIPPeerCfgTableCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3.1cvVoIPPeerCfgEntryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.3.1.28cvVoIPPeerCfgBitRatesCISCO-VOICE-DIAL-CONTROL-MIB