CISCO-VOICE-DIAL-CONTROL-MIB :: cvVoIPCallHistoryIcpif

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvVoIPCallHistoryIcpif

cvVoIPCallHistoryIcpif

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallHistoryIcpif

OID (numeric): 1.3.6.1.4.1.9.9.63.1.4.2.1.18

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The Calculated Planning Impairment Factor (Icpif) of the call that is associated to this call leg. The value in this object is computed by the following equation. Icpif of the call = Itotal (total impairment value) of the call - A (Expectation Factor) in the cvVoIPPeerCfgExpectFactor of the call leg associated peer. A value of -1 implies that Icpif was not calculated and is meaningless for this call.

What is cvVoIPCallHistoryIcpif?

This Integer32 (-1 to 55, in equipment impairment factor units) reports the Calculated Planning Impairment Factor for the call, computed as the total impairment value minus the peer's configured Expectation Factor, with -1 meaning the value was not calculated. Administrators use Icpif as a standardized voice-quality score, where higher values indicate worse perceived quality, to flag calls needing investigation. For example, a spike in Icpif values across calls on one trunk while other trunks stay low would direct the admin to investigate impairments specific to that trunk's path.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.4.2.1.18
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallHistoryIcpif

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.4.2.1.18.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallHistoryIcpif.1

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallHistoryIcpif OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.4cvGatewayCallHistoryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.4.2cvVoIPCallHistoryTableCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.4.2.1cvVoIPCallHistoryEntryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.4.2.1.18cvVoIPCallHistoryIcpifCISCO-VOICE-DIAL-CONTROL-MIB