CISCO-VOICE-DIAL-CONTROL-MIB :: cvVoIPCallHistoryCRC

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvVoIPCallHistoryCRC

cvVoIPCallHistoryCRC

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallHistoryCRC

OID (numeric): 1.3.6.1.4.1.9.9.63.1.4.2.1.39

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: If the object has a value of true(1), frame CRC will be included in the payload and if the value is false(2), frame CRC will not be included in the payload. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object cvVoIPCallHistoryCoderTypeRate is not equal to gsmAmrNb enum.

What is cvVoIPCallHistoryCRC?

This TruthValue object indicates whether frame CRC was included in the RTP payload for an octet-aligned AMR-NB call (true) or not (false), and it only applies when the RTP frame type is octet aligned and the coder is gsmAmrNb. Administrators use it to verify whether frame-level error detection was active for that call, which affects the codec's ability to detect corrupted frames. For example, if AMR-NB calls on a noisy link show poor recovery from frame errors, confirming this object is false would explain that CRC-based error detection wasn't enabled for those calls.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.4.2.1.39
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallHistoryCRC

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.4.2.1.39.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallHistoryCRC.1

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallHistoryCRC OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.4cvGatewayCallHistoryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.4.2cvVoIPCallHistoryTableCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.4.2.1cvVoIPCallHistoryEntryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.4.2.1.39cvVoIPCallHistoryCRCCISCO-VOICE-DIAL-CONTROL-MIB