CISCO-VOICE-DIAL-CONTROL-MIB :: cvVoIPCallActiveRobustSorting

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvVoIPCallActiveRobustSorting

cvVoIPCallActiveRobustSorting

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRobustSorting

OID (numeric): 1.3.6.1.4.1.9.9.63.1.3.2.1.36

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: If the object has a value of true(1), payload employs robust sorting and if the value is false(2), payload does not employ robust sorting. This object is applicable only when RTP frame type is octet aligned. This object is not instantiated when the object cvVoIPCallActiveCoderTypeRate is not equal to gsmAmrNb enum.

What is cvVoIPCallActiveRobustSorting?

This is a read-only true/false flag reporting whether the AMR-NB payload for this active call employs robust sorting, applicable only when the call uses octet-aligned RTP framing and the negotiated coder is AMR-NB. An admin checks this to see whether this loss-resilience feature, which reorders payload bits to better tolerate packet loss, was actually negotiated for a live call. For example, on a lossy network path, an admin might specifically check that this feature is active on AMR-NB calls to confirm the resilience mechanism is actually helping rather than assuming it's on by default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.3.2.1.36
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRobustSorting

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.3.2.1.36.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRobustSorting.1

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRobustSorting OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3cvGatewayCallActiveCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3.2cvVoIPCallActiveTableCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3.2.1cvVoIPCallActiveEntryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3.2.1.36cvVoIPCallActiveRobustSortingCISCO-VOICE-DIAL-CONTROL-MIB