CISCO-VOICE-DIAL-CONTROL-MIB :: cvVoIPCallActiveRemSigIPAddrT

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvVoIPCallActiveRemSigIPAddrT

cvVoIPCallActiveRemSigIPAddrT

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemSigIPAddrT

OID (numeric): 1.3.6.1.4.1.9.9.63.1.3.2.1.23

Node type: OBJECT-TYPE

Type: InetAddressType

Access: read-only

Description: This object specifies the type of address contained in the associated instance of cvVoIPCallActiveRemSigIPAddr.

What is cvVoIPCallActiveRemSigIPAddrT?

This is a read-only value indicating the address family used to interpret the remote signaling IP address stored in cvVoIPCallActiveRemSigIPAddr. An admin needs this to correctly parse that companion address field, following the same address-type/address-value pairing pattern used throughout these Cisco voice MIBs. For example, in a network running both IPv4 and IPv6 signaling paths, this object tells the admin which format to expect when reading the paired address object.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.3.2.1.23
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemSigIPAddrT

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.3.2.1.23.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemSigIPAddrT.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cvVoIPCallActiveRemSigIPAddrT.1

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemSigIPAddrT OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3cvGatewayCallActiveCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3.2cvVoIPCallActiveTableCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3.2.1cvVoIPCallActiveEntryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3.2.1.23cvVoIPCallActiveRemSigIPAddrTCISCO-VOICE-DIAL-CONTROL-MIB