All MIBs › CISCO-VOICE-DIAL-CONTROL-MIB › cvPeerCommonCfgTargetTrunkGrpLabel
cvPeerCommonCfgTargetTrunkGrpLabel
Module: CISCO-VOICE-DIAL-CONTROL-MIB
OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgTargetTrunkGrpLabel
OID (numeric): 1.3.6.1.4.1.9.9.63.1.2.4.1.10
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-write
Description: The object specifies the Target Trunk Group Label for the peer. The Target Trunk Group Label is used to match with the Target Trunk Group Label of a call. If the Target Trunk Group Label in this object is matched with the Target Trunk Group Label of a call, then the associated peer will be used to handle the call. Only alphanumeric characters, '-' and '_' are allowed in the string.
What is cvPeerCommonCfgTargetTrunkGrpLabel?
This is a read-write text field specifying a Target Trunk Group Label that, when matched against a call's target trunk group label, causes this peer to be used to hand the call off to that trunk group, following the same character restrictions as the other carrier and trunk-group ID fields. An admin uses this to direct outbound calls to a specific trunk group on the far end based on trunk-group identification. For example, a gateway needing to steer certain calls onto a specific outbound trunk group for cost or capacity reasons could configure this field to enforce that routing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.10 snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgTargetTrunkGrpLabel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.10.1 snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgTargetTrunkGrpLabel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.10.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cvPeerCommonCfgTargetTrunkGrpLabel.1
Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgTargetTrunkGrpLabel OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.63 | ciscoVoiceDialControlMIB | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1 | cvdcMIBObjects | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2 | cvPeer | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.4 | cvPeerCommonCfgTable | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.4.1 | cvPeerCommonCfgEntry | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.4.1.10 | cvPeerCommonCfgTargetTrunkGrpLabel | CISCO-VOICE-DIAL-CONTROL-MIB |