All MIBs › CISCO-VOICE-DIAL-CONTROL-MIB › cvPeerCommonCfgSourceTrunkGrpLabel
cvPeerCommonCfgSourceTrunkGrpLabel
Module: CISCO-VOICE-DIAL-CONTROL-MIB
OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgSourceTrunkGrpLabel
OID (numeric): 1.3.6.1.4.1.9.9.63.1.2.4.1.9
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-write
Description: The object specifies the Source Trunk Group Label for the peer. The Source Trunk Group Label is used to match with the Source Trunk Group Label of a call. If the Source Trunk Group Label in this object is matched with the Source Trunk Group Label of a call, then the associated peer will be used to handle the call. Only alphanumeric characters, '-' and '_' are allowed in the string.
What is cvPeerCommonCfgSourceTrunkGrpLabel?
This is a read-write text field specifying a Source Trunk Group Label that, when matched against a call's source trunk group label, causes this peer to be selected to handle that call, again limited to alphanumeric characters plus hyphen and underscore. An admin uses this in trunk-group-aware routing scenarios to select peers based on which trunk group a call arrived on rather than the number dialed. For example, a gateway aggregating multiple trunk groups from different customers could route calls differently depending on which trunk group label they came in on.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.9 snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgSourceTrunkGrpLabel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.9.1 snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgSourceTrunkGrpLabel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.9.1 s <value>
Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgSourceTrunkGrpLabel OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.63 | ciscoVoiceDialControlMIB | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1 | cvdcMIBObjects | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2 | cvPeer | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.4 | cvPeerCommonCfgTable | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.4.1 | cvPeerCommonCfgEntry | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.4.1.9 | cvPeerCommonCfgSourceTrunkGrpLabel | CISCO-VOICE-DIAL-CONTROL-MIB |