CISCO-VOICE-DIAL-CONTROL-MIB :: cvPeerCommonCfgSourceCarrierId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvPeerCommonCfgSourceCarrierId

cvPeerCommonCfgSourceCarrierId

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgSourceCarrierId

OID (numeric): 1.3.6.1.4.1.9.9.63.1.2.4.1.7

Node type: OBJECT-TYPE

Type: SnmpAdminString

Access: read-write

Description: The object specifies the Source Carrier Id for the peer. The Source Carrier Id is used to match with the Source Carrier Id of a call. If the Source Carrier Id in this object is matched with the Source Carrier Id of a call, then the associated peer will be used to handle the call. Only alphanumeric characters, '-' and '_' are allowed in the string.

What is cvPeerCommonCfgSourceCarrierId?

This is a read-write text field specifying a Source Carrier Id that, when it matches the source carrier ID of an incoming call, causes this peer to be selected to handle that call, restricted to alphanumeric characters plus hyphen and underscore. An admin uses this in carrier-interconnect scenarios to route calls based on which upstream carrier originated them. For example, a wholesale voice provider might configure separate peers with different source carrier IDs to apply carrier-specific routing or billing treatment to calls from different origination carriers.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.7
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgSourceCarrierId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.7.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgSourceCarrierId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.7.1 s <value>

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgSourceCarrierId OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2cvPeerCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.4cvPeerCommonCfgTableCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.4.1cvPeerCommonCfgEntryCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.2.4.1.7cvPeerCommonCfgSourceCarrierIdCISCO-VOICE-DIAL-CONTROL-MIB