All MIBs › CISCO-VOICE-DIAL-CONTROL-MIB › cvPeerCommonCfgApplicationName
cvPeerCommonCfgApplicationName
Module: CISCO-VOICE-DIAL-CONTROL-MIB
OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName
OID (numeric): 1.3.6.1.4.1.9.9.63.1.2.4.1.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The object specifies the application to handle the incoming call after the peer is selected. If no application name is specified, then the default session application will take care of the incoming call.
What is cvPeerCommonCfgApplicationName?
This is a read-write text field naming the application that should handle an incoming call once this peer has been selected, with the gateway's default session application taking over if no name is specified. An admin sets this to route calls arriving on a particular peer to a specific IVR script, voicemail application, or other call-handling logic rather than the generic default. For example, an admin building an automated attendant for a specific DID range would set this object to the name of that custom application.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.3 snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.3.1 snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.2.4.1.3.1 s <value>
Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.63 | ciscoVoiceDialControlMIB | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1 | cvdcMIBObjects | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2 | cvPeer | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.4 | cvPeerCommonCfgTable | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.4.1 | cvPeerCommonCfgEntry | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.2.4.1.3 | cvPeerCommonCfgApplicationName | CISCO-VOICE-DIAL-CONTROL-MIB |