All MIBs › CISCO-VOICE-DIAL-CONTROL-MIB › cvGeneralDSCPPolicyNotificationEnable
cvGeneralDSCPPolicyNotificationEnable
Module: CISCO-VOICE-DIAL-CONTROL-MIB
OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvGeneralDSCPPolicyNotificationEnable
OID (numeric): 1.3.6.1.4.1.9.9.63.1.1.3
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object indicates whether cvdcPolicyViolationNotification traps should be generated for a RPH to DSCP mapping violation for SIP voice calls.
If the value of this object is 'true', cvdcPolicyViolationNotification traps will be generated for SIP voice over IP peers when a RPH to DSCP violation condition is detected . If the value of this object is 'false', cvdcPolicyViolationNotification traps will be generated only for calls for which the cvVoIPPeerCfgDSCPPolicyNotificationEnable object of voice over IP peers having set to 'true'.
What is cvGeneralDSCPPolicyNotificationEnable?
This is a read-write true/false setting that controls whether cvdcPolicyViolationNotification traps are generated for RPH-to-DSCP mapping violations specifically on SIP voice calls. An admin enables this to be alerted when a SIP call's Resource-Priority Header doesn't map correctly to the expected Differentiated Services Code Point, which matters for enforcing QoS or precedence policy on voice traffic. For example, a deployment relying on RPH-based call precedence for emergency or government calls would enable this to catch policy violations that could undermine priority call handling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.1.3 snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvGeneralDSCPPolicyNotificationEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.1.3.1 snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvGeneralDSCPPolicyNotificationEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.1.3.1 s <value>
Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvGeneralDSCPPolicyNotificationEnable OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.63 | ciscoVoiceDialControlMIB | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1 | cvdcMIBObjects | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.1 | cvGeneralConfiguration | CISCO-VOICE-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.63.1.1.3 | cvGeneralDSCPPolicyNotificationEnable | CISCO-VOICE-DIAL-CONTROL-MIB |