CISCO-VOICE-DIAL-CONTROL-MIB :: cvCallActiveDS0sLowNotifyEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-DIAL-CONTROL-MIBcvCallActiveDS0sLowNotifyEnable

cvCallActiveDS0sLowNotifyEnable

Module: CISCO-VOICE-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0sLowNotifyEnable

OID (numeric): 1.3.6.1.4.1.9.9.63.1.3.7

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Specifies whether or not cvdcActiveDS0sLowNotification should be generated.

'true' : Indicates that the cvdcActiveDS0sLowNotification generation is enabled.

'false': Indicates that cvdcActiveDS0sLowNotification generation is disabled.

What is cvCallActiveDS0sLowNotifyEnable?

This is a read-write true/false setting that enables or disables generation of the cvdcActiveDS0sLowNotification trap when active DS0 usage crosses the configured low threshold. An admin uses this the same way as the high-notify setting but for the low-utilization boundary, letting them selectively silence low-utilization alerts if they're not useful for a given deployment. For example, an admin monitoring only for congestion, not underutilization, might disable this low-notify object while leaving the high-notify one enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.3.7
snmpwalk -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0sLowNotifyEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.63.1.3.7.1
snmpget -v2c -c public <target> CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0sLowNotifyEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.63.1.3.7.1 s <value>

Start monitoring Cisco voice gateways (POTS/VoIP dial peers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveDS0sLowNotifyEnable OID value, configure state conditions and alerts, and monitor any Cisco voice gateways (POTS/VoIP dial peers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.63ciscoVoiceDialControlMIBCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1cvdcMIBObjectsCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3cvGatewayCallActiveCISCO-VOICE-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.63.1.3.7cvCallActiveDS0sLowNotifyEnableCISCO-VOICE-DIAL-CONTROL-MIB