All MIBs › CISCO-VISM-XGCP-EXT › vismXgcpPort
vismXgcpPort
Module: CISCO-VISM-XGCP-EXT
OID (symbolic): CISCO-VISM-XGCP-EXT::vismXgcpPort
OID (numeric): 1.3.6.1.4.1.351.110.5.5.5.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object is used to configure the local UDP port on VISM used by the SGCP and MGCP protocols to communicate with the call agent.
The UDP port is used together with vismIpAddress to identify the local end of a SGCP/MGCP connection.
The default value of this object is 2427.
In VISM 1.5 this object always defaults to 2427 and is read-only.
What is vismXgcpPort?
This read-write Integer32 (1025-65535, default 2427) configures the local UDP port VISM uses with SGCP and MGCP to communicate with the call agent, working together with vismIpAddress to identify the local end of the SGCP/MGCP connection, and the MIB notes it is fixed and read-only in VISM 1.5. An admin cares because this port must match what the call agent expects to reach the gateway on, or signaling will fail to connect. For example, an operator running a version of VISM later than 1.5 that needs a nonstandard signaling port to avoid a firewall conflict would change this object away from the 2427 default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.5.1.2 snmpwalk -v2c -c public <target> CISCO-VISM-XGCP-EXT::vismXgcpPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.5.1.2.1 snmpget -v2c -c public <target> CISCO-VISM-XGCP-EXT::vismXgcpPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.5.1.2.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-XGCP-EXT::vismXgcpPort OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5 | voice | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.5 | vismXgcpExtensionGrp | CISCO-VISM-XGCP-EXT |
| 1.3.6.1.4.1.351.110.5.5.5.1 | vismXgcpCoreObjects | CISCO-VISM-XGCP-EXT |
| 1.3.6.1.4.1.351.110.5.5.5.1.2 | vismXgcpPort | CISCO-VISM-XGCP-EXT |