CISCO-VISM-SESSION-MIB :: vismRudpSessionType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VISM-SESSION-MIBvismRudpSessionType

vismRudpSessionType

Module: CISCO-VISM-SESSION-MIB

OID (symbolic): CISCO-VISM-SESSION-MIB::vismRudpSessionType

OID (numeric): 1.3.6.1.4.1.351.110.5.5.11.3.1.22

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates if the session is configured for Trunking or PRI Backhaul. By default the object is set to 'backhaul' and it needs to set to 'lapdTrunking' if LAPD Trunking needs to be done.

What is vismRudpSessionType?

This read-write INTEGER indicates whether a session is configured for backhaul (default) or lapdTrunking, the latter needed specifically when LAPD Trunking is required. An admin cares because this setting changes what kind of traffic the session is meant to carry and interacts with other objects like vismRudpSessionRmtGwIp that only apply in lapdTrunking mode. For example, an operator setting up LAPD trunking between two gateways must set this object to lapdTrunking(2) rather than leaving it at the backhaul default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.11.3.1.22
snmpwalk -v2c -c public <target> CISCO-VISM-SESSION-MIB::vismRudpSessionType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.11.3.1.22.1
snmpget -v2c -c public <target> CISCO-VISM-SESSION-MIB::vismRudpSessionType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.11.3.1.22.1 i <value>

Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-SESSION-MIB::vismRudpSessionType OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.5voiceBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.5.11vismSessionGrpCISCO-VISM-SESSION-MIB
1.3.6.1.4.1.351.110.5.5.11.3vismRudpSessionCnfTableCISCO-VISM-SESSION-MIB
1.3.6.1.4.1.351.110.5.5.11.3.1vismRudpSessionCnfEntryCISCO-VISM-SESSION-MIB
1.3.6.1.4.1.351.110.5.5.11.3.1.22vismRudpSessionTypeCISCO-VISM-SESSION-MIB