All MIBs › CISCO-VISM-SESSION-MIB › vismRudpSessionCnfRowStatus
vismRudpSessionCnfRowStatus
Module: CISCO-VISM-SESSION-MIB
OID (symbolic): CISCO-VISM-SESSION-MIB::vismRudpSessionCnfRowStatus
OID (numeric): 1.3.6.1.4.1.351.110.5.5.11.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable allows the user to add or delete the entry for this table. 'createAndGo': Use this to add a RUDP session in this table. RUDP vismRudpSessionNum, vismRudpSessionGrpNum, vismRudpSessionPriority, vismRudpSessionLocalPort and vismRudpSessionRmtPort are required while creating an entry for PRI(Primary Rate Interface) Backhaul. On the other hand RUDP vismRudpSessionNum, vismRudpSessionLocalPort, vismRudpSessionRmtPort, remote IP and RUDP session type are required for LAPD Trunking.
'active': This state indicates that the session is available for use by the managed device;
'destroy': Use this to delete an RUDP session from this table. Only RUDP session number is needed for deleting. The last session shall not be deleted if there are still active LAPD entries.
What is vismRudpSessionCnfRowStatus?
This read-write INTEGER manages adding or deleting a RUDP session row via createAndGo, which requires vismRudpSessionNum, vismRudpSessionGrpNum, vismRudpSessionPriority, vismRudpSessionLocalPort, and vismRudpSessionRmtPort for PRI Backhaul, or a slightly different required set for other applications. An admin cares because missing any of these required fields will prevent the RUDP session from being successfully created, a common source of provisioning errors. For example, an operator setting up a PRI Backhaul RUDP session must supply all five required objects together in the createAndGo operation or the row creation will fail.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.11.3.1.3 snmpwalk -v2c -c public <target> CISCO-VISM-SESSION-MIB::vismRudpSessionCnfRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.11.3.1.3.1 snmpget -v2c -c public <target> CISCO-VISM-SESSION-MIB::vismRudpSessionCnfRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.11.3.1.3.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-SESSION-MIB::vismRudpSessionCnfRowStatus OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5 | voice | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.11 | vismSessionGrp | CISCO-VISM-SESSION-MIB |
| 1.3.6.1.4.1.351.110.5.5.11.3 | vismRudpSessionCnfTable | CISCO-VISM-SESSION-MIB |
| 1.3.6.1.4.1.351.110.5.5.11.3.1 | vismRudpSessionCnfEntry | CISCO-VISM-SESSION-MIB |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.3 | vismRudpSessionCnfRowStatus | CISCO-VISM-SESSION-MIB |