CISCO-VISM-MODULE-MIB :: vismMemoryUtilizationThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VISM-MODULE-MIBvismMemoryUtilizationThreshold

vismMemoryUtilizationThreshold

Module: CISCO-VISM-MODULE-MIB

OID (symbolic): CISCO-VISM-MODULE-MIB::vismMemoryUtilizationThreshold

OID (numeric): 1.3.6.1.4.1.351.110.3.17.4.38

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This attribute holds the threshold value of memory utilization on the VISM card. A trap is sent out if the memory utilization equals or exceeds this threshold.

What is vismMemoryUtilizationThreshold?

This read-write Integer32 (1-100) sets the memory utilization percentage at or above which VISM sends a trap warning that the card's memory usage has crossed the configured limit. An admin cares because sustained high memory utilization can precede card instability or failed connection setups, so this threshold is the early-warning trigger. For example, an operator noticing gradual memory growth on a VISM card over weeks of uptime would tune this threshold to alert well before memory exhaustion.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.38
snmpwalk -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismMemoryUtilizationThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.38.1
snmpget -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismMemoryUtilizationThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.3.17.4.38.1 i <value>

Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-MODULE-MIB::vismMemoryUtilizationThreshold OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.3cardSpecificBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.3.17vismConfigCISCO-VISM-MODULE-MIB
1.3.6.1.4.1.351.110.3.17.4vismSystemGrpCISCO-VISM-MODULE-MIB
1.3.6.1.4.1.351.110.3.17.4.38vismMemoryUtilizationThresholdCISCO-VISM-MODULE-MIB