CISCO-VISM-MODULE-MIB :: vismDualToneDetect

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VISM-MODULE-MIBvismDualToneDetect

vismDualToneDetect

Module: CISCO-VISM-MODULE-MIB

OID (symbolic): CISCO-VISM-MODULE-MIB::vismDualToneDetect

OID (numeric): 1.3.6.1.4.1.351.110.3.17.4.39

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object is use to enable/disable dual tone configuration. When the dual tone is enable and detected, the Marconi Application will upspeed to VBD(Voice Band Data) codec.

What is vismDualToneDetect?

This read-write TruthValue enables or disables dual-tone detection, and when enabled and a dual tone is detected, the application upspeeds the call to a Voice Band Data (VBD) codec. An admin cares because this setting controls whether the gateway automatically reacts to fax/modem-style dual tones by switching codecs mid-call to preserve data integrity. For example, an operator supporting fax-over-VoIP traffic on VISM would enable this object so incoming dual tones trigger an automatic upspeed to the VBD codec.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.39
snmpwalk -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismDualToneDetect

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.39.1
snmpget -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismDualToneDetect.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.3.17.4.39.1 s <value>

Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-MODULE-MIB::vismDualToneDetect OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.3cardSpecificBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.3.17vismConfigCISCO-VISM-MODULE-MIB
1.3.6.1.4.1.351.110.3.17.4vismSystemGrpCISCO-VISM-MODULE-MIB
1.3.6.1.4.1.351.110.3.17.4.39vismDualToneDetectCISCO-VISM-MODULE-MIB