All MIBs › CISCO-VISM-MODULE-MIB › vismContinuityCo2Timer
vismContinuityCo2Timer
Module: CISCO-VISM-MODULE-MIB
OID (symbolic): CISCO-VISM-MODULE-MIB::vismContinuityCo2Timer
OID (numeric): 1.3.6.1.4.1.351.110.3.17.4.31
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: A 1780Hz tone is applied, if the co2(Continuity Tone 2) is specify as a signal the range is 1780Hz +/- 20Hz and if it is specify as an event the range is 1780Hz +/- 30Hz. The continuity tone is applied for the specified duration of time in seconds.
What is vismContinuityCo2Timer?
This read-write Integer32 (0-60 seconds) sets how long a 1780Hz co2 (Continuity Tone 2) tone is applied, with a +/-20Hz tolerance when used as a signal or +/-30Hz when used as an event. An admin cares because it controls the duration of the reverse continuity tone in a continuity test, affecting how promptly the test can conclude. For example, an engineer tightening call-setup latency on a well-behaved trunk might shorten this timer since the far end reliably responds to co2 quickly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.31 snmpwalk -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismContinuityCo2Timer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.31.1 snmpget -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismContinuityCo2Timer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.3.17.4.31.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-MODULE-MIB::vismContinuityCo2Timer OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.3 | cardSpecific | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.3.17 | vismConfig | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.4 | vismSystemGrp | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.4.31 | vismContinuityCo2Timer | CISCO-VISM-MODULE-MIB |