All MIBs › CISCO-VISM-MODULE-MIB › vismBearerIpPingEnable
vismBearerIpPingEnable
Module: CISCO-VISM-MODULE-MIB
OID (symbolic): CISCO-VISM-MODULE-MIB::vismBearerIpPingEnable
OID (numeric): 1.3.6.1.4.1.351.110.3.17.4.41
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object is used to enable/disable the bearer IP ping response configuration. When set to true, the bearer IP ping feature will be enabled on the module and the bearer IP will respond to ping messages. When set to false, the bearer IP ping feature is disabled on the module.
What is vismBearerIpPingEnable?
This read-write TruthValue enables or disables the bearer IP's response to ping messages, where setting it true makes the bearer IP address answer ICMP pings and setting it false disables that response. An admin cares because this controls a basic reachability-testing capability for the voice bearer path itself, separate from the card's management IP. For example, a technician needing to verify end-to-end bearer path connectivity during troubleshooting would set this to true so the bearer IP responds to diagnostic pings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.41 snmpwalk -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismBearerIpPingEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.41.1 snmpget -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismBearerIpPingEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.3.17.4.41.1 s <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-MODULE-MIB::vismBearerIpPingEnable OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.3 | cardSpecific | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.3.17 | vismConfig | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.4 | vismSystemGrp | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.4.41 | vismBearerIpPingEnable | CISCO-VISM-MODULE-MIB |