All MIBs › CISCO-VISM-DSX1-MIB › vismDsx1ReorderTO
vismDsx1ReorderTO
Module: CISCO-VISM-DSX1-MIB
OID (symbolic): CISCO-VISM-DSX1-MIB::vismDsx1ReorderTO
OID (numeric): 1.3.6.1.4.1.351.110.4.3.5.1.1.1.19
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Time in seconds for which the reorder/fast busy tone will be generated unless interrupted (e.g. by the hangup from the calling party). The value zero indicates that the tone will be generated indefinitely unless interrupted.
This MIB object is not applicable unless the value of vismDsx1TonePlanRegion and vismDsx1TonePlanVersion MIB objects are not 'NULL' string.
What is vismDsx1ReorderTO?
This Integer32 (0..3600), in seconds, sets how long the reorder (fast busy) tone is generated unless interrupted by a hangup, with zero meaning indefinite; it requires a non-NULL tone plan. Reorder tone typically indicates network congestion or routing failure, so bounding its duration prevents a failed call attempt from holding line resources open indefinitely. For instance, an admin dealing with intermittent trunk congestion would ensure vismDsx1ReorderTO is set to a reasonable finite value so reorder tone doesn't play forever on failed attempts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.19 snmpwalk -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1ReorderTO
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.19.1 snmpget -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1ReorderTO.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.19.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX1-MIB::vismDsx1ReorderTO OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3 | dsx1 | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.3.5 | dsx1Vism | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1 | dsx1VismCnfGrp | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1 | dsx1VismCnfGrpTable | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1 | dsx1VismCnfGrpEntry | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.19 | vismDsx1ReorderTO | CISCO-VISM-DSX1-MIB |