All MIBs › CISCO-VISM-DSX1-MIB › vismDsx1ElectricalSignalEnable
vismDsx1ElectricalSignalEnable
Module: CISCO-VISM-DSX1-MIB
OID (symbolic): CISCO-VISM-DSX1-MIB::vismDsx1ElectricalSignalEnable
OID (numeric): 1.3.6.1.4.1.351.110.4.3.5.1.1.1.38
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies whether electrical signal on the line is enabled or disabled. If the value of this object is 'true', electrical signal on the line is enabled. If the value of this object is 'false', electrical signal on the line is disabled.
What is vismDsx1ElectricalSignalEnable?
This read-write TruthValue enables or disables the electrical signal on this line. Disabling the electrical signal effectively takes the physical line transmission down, which an admin might do deliberately during certain maintenance or test procedures. For example, a technician performing physical-layer testing on a T1/E1 span might disable vismDsx1ElectricalSignalEnable to safely work on that line's connection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.38 snmpwalk -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1ElectricalSignalEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.38.1 snmpget -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1ElectricalSignalEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.38.1 s <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX1-MIB::vismDsx1ElectricalSignalEnable OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3 | dsx1 | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.3.5 | dsx1Vism | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1 | dsx1VismCnfGrp | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1 | dsx1VismCnfGrpTable | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1 | dsx1VismCnfGrpEntry | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.38 | vismDsx1ElectricalSignalEnable | CISCO-VISM-DSX1-MIB |