All MIBs › CISCO-VISM-DSX1-MIB › vismDsx1AlarmLogOperTimer
vismDsx1AlarmLogOperTimer
Module: CISCO-VISM-DSX1-MIB
OID (symbolic): CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogOperTimer
OID (numeric): 1.3.6.1.4.1.351.110.4.3.5.1.1.1.37
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object specifies the time remaining in minutes for which the detailed alarm logging will remain active on the DS1. When this value becomes 0, it indicates that the DS1 has run through the time specified in vismDsx1AlarmLogOperTimer. This will cause the vismDsx1AlarmLogEnable to be set to false. If vismDsx1AlarmLogAdminTimer is overwritten with a new value, this object will also be set to reflect the new value.
What is vismDsx1AlarmLogOperTimer?
This read-only Unsigned32 (0..2147483647), in minutes, reports the time remaining before detailed alarm logging automatically turns off on this DS1, and reaching zero causes vismDsx1AlarmLogEnable to be set false. This gives an admin real-time visibility into how much of the configured logging window is left, useful for knowing whether detailed logs are still being captured during an ongoing investigation. For example, an admin checking on a diagnostic session partway through would read vismDsx1AlarmLogOperTimer to confirm how many more minutes of detailed logging remain before it auto-disables.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.37 snmpwalk -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogOperTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.37.1 snmpget -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogOperTimer.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> vismDsx1AlarmLogOperTimer.1
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogOperTimer OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3 | dsx1 | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.3.5 | dsx1Vism | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1 | dsx1VismCnfGrp | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1 | dsx1VismCnfGrpTable | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1 | dsx1VismCnfGrpEntry | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.37 | vismDsx1AlarmLogOperTimer | CISCO-VISM-DSX1-MIB |