All MIBs › CISCO-VISM-DSX1-MIB › vismDsx1AlarmLogEnable
vismDsx1AlarmLogEnable
Module: CISCO-VISM-DSX1-MIB
OID (symbolic): CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogEnable
OID (numeric): 1.3.6.1.4.1.351.110.4.3.5.1.1.1.35
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies whether detailed alarm logging on the DS1 is enabled or disabled. If this object is true, detailed alarm logging for the DS1 will be enabled. If this object is false, detailed alarm logging for the DS1 will be disabled. When this object is enabled, vismDsx1AlarmLogAdminTimer will indicate the time configured in minutes for which this object will continue to remain enabled. While, vismDsx1AlarmLogOperTimer will indicate the time in minutes remaining for the alarm logging to continue to remain enabled. Alarm logging can be disabled before the time specified in vismDsx1AlarmLogAdminTimer runs out. If alarm logging is disabled before the timer runs out, then on re-enabling the logging, the vismDsx1AlarmLogAdminTimer will need to be reconfigured as well.
What is vismDsx1AlarmLogEnable?
This read-write TruthValue enables or disables detailed alarm logging on this DS1, with vismDsx1AlarmLogAdminTimer controlling how long that logging stays active once enabled. Turning this on gives an admin a richer alarm history for troubleshooting an intermittent line problem, at the cost of extra logging overhead, so it's typically enabled temporarily rather than left on permanently. For example, an admin investigating a recurring but hard-to-catch alarm on a line would enable vismDsx1AlarmLogEnable and set a suitable timer to capture detailed alarm data during the diagnostic window.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.35 snmpwalk -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.35.1 snmpget -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.35.1 s <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogEnable OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3 | dsx1 | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.3.5 | dsx1Vism | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1 | dsx1VismCnfGrp | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1 | dsx1VismCnfGrpTable | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1 | dsx1VismCnfGrpEntry | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.35 | vismDsx1AlarmLogEnable | CISCO-VISM-DSX1-MIB |