All MIBs › CISCO-VISM-DSX1-MIB › vismDsx1AlarmLogAdminTimer
vismDsx1AlarmLogAdminTimer
Module: CISCO-VISM-DSX1-MIB
OID (symbolic): CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogAdminTimer
OID (numeric): 1.3.6.1.4.1.351.110.4.3.5.1.1.1.36
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the time for which the detailed alarm logging for the DS1 will remain active. The value in this object can be set and is valid only if vismDsx1AlarmLogEnable for this DS1 is set to true. If this object is set to 0, it indicates that the alarm logging will remain active forever. Once set, this object can be overwritten as long as vismDsx1AlarmLogEnable is true. If this is done, the vismDsx1AlarmLogAdminTimer will be refreshed to take the new value set in this object.
What is vismDsx1AlarmLogAdminTimer?
This Unsigned32 (0..2147483647), in minutes, sets how long detailed alarm logging remains active on this DS1, valid only when vismDsx1AlarmLogEnable is true, with zero meaning logging stays active indefinitely. This lets an admin bound how long the extra logging overhead runs, automatically returning to normal logging once the diagnostic window has passed, and it can be overwritten any time logging remains enabled. For example, an admin troubleshooting a line for a day might set vismDsx1AlarmLogAdminTimer to 1440 minutes so detailed logging automatically turns itself off after 24 hours.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.36 snmpwalk -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogAdminTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.36.1 snmpget -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogAdminTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.36.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX1-MIB::vismDsx1AlarmLogAdminTimer OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3 | dsx1 | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.3.5 | dsx1Vism | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1 | dsx1VismCnfGrp | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1 | dsx1VismCnfGrpTable | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1 | dsx1VismCnfGrpEntry | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.36 | vismDsx1AlarmLogAdminTimer | CISCO-VISM-DSX1-MIB |