All MIBs › CISCO-VISM-DSX1-MIB › vismBearerBusyCode
vismBearerBusyCode
Module: CISCO-VISM-DSX1-MIB
OID (symbolic): CISCO-VISM-DSX1-MIB::vismBearerBusyCode
OID (numeric): 1.3.6.1.4.1.351.110.4.3.5.1.1.1.33
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object is used when vismTrunkConditionEnable is enabled on a line. It is a configurable busy pattern sent out on the 'Bearer' on the channels, which are receiving remote ATM channel ID (CID) alarms. If this object is not set, it assumes a default value of 255 for E1 and 127 for T1.
What is vismBearerBusyCode?
This read-write Integer32 (0..255) sets the configurable busy pattern sent out on the bearer channels affected by remote ATM CID alarms when vismTrunkConditionEnable is active, defaulting to 255 for E1 and 127 for T1 if unset. This lets an admin control exactly what signaling pattern downstream TDM equipment sees during a trunk-conditioning event, ensuring it's correctly interpreted as busy rather than some other state. For example, if downstream equipment expects a nonstandard busy pattern, an admin would set vismBearerBusyCode to that value to keep trunk conditioning behavior compatible.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.33 snmpwalk -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismBearerBusyCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.33.1 snmpget -v2c -c public <target> CISCO-VISM-DSX1-MIB::vismBearerBusyCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.3.5.1.1.1.33.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX1-MIB::vismBearerBusyCode OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3 | dsx1 | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.3.5 | dsx1Vism | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1 | dsx1VismCnfGrp | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1 | dsx1VismCnfGrpTable | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1 | dsx1VismCnfGrpEntry | CISCO-VISM-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.33 | vismBearerBusyCode | CISCO-VISM-DSX1-MIB |