CISCO-VISM-ATM-TRUNK-MIB :: vismAal2CidProfileNum

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VISM-ATM-TRUNK-MIBvismAal2CidProfileNum

vismAal2CidProfileNum

Module: CISCO-VISM-ATM-TRUNK-MIB

OID (symbolic): CISCO-VISM-ATM-TRUNK-MIB::vismAal2CidProfileNum

OID (numeric): 1.3.6.1.4.1.351.110.5.5.3.4.1.1.8

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This attribute defines the profile number. A profile is a set of entries, where each entry specifies an encoding format with a UUI(User-to-User Indication) range and length. This set defines a mapping that informs the receiver of a Type 1 packet how to interpret the packet contents, i.e. which encoding format in the profile is being used.

What is vismAal2CidProfileNum?

This read-write Integer32 object selects the profile number, a set of entries each mapping an encoding format to a UUI range and length, that tells the receiver how to interpret a Type 1 packet's contents for this channel. Getting this value wrong means the far end will misinterpret the encoding of voice payload carried in Type 1 packets, corrupting the call. An engineer configuring a new voice channel would set this value to match a profile already populated in the corresponding profile table selected by vismAal2CidProfileType.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.4.1.1.8
snmpwalk -v2c -c public <target> CISCO-VISM-ATM-TRUNK-MIB::vismAal2CidProfileNum

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.4.1.1.8.1
snmpget -v2c -c public <target> CISCO-VISM-ATM-TRUNK-MIB::vismAal2CidProfileNum.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.3.4.1.1.8.1 i <value>

Start monitoring Cisco MGX/VISM ATM voice gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-ATM-TRUNK-MIB::vismAal2CidProfileNum OID value, configure state conditions and alerts, and monitor any Cisco MGX/VISM ATM voice gateways from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.5voiceBASIS-MIB
1.3.6.1.4.1.351.110.5.5.3vismChanGrpBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.5.3.4vismAal2CidGrpCISCO-VISM-ATM-TRUNK-MIB
1.3.6.1.4.1.351.110.5.5.3.4.1vismAal2CidCnfTableCISCO-VISM-ATM-TRUNK-MIB
1.3.6.1.4.1.351.110.5.5.3.4.1.1vismAal2CidEntryCISCO-VISM-ATM-TRUNK-MIB
1.3.6.1.4.1.351.110.5.5.3.4.1.1.8vismAal2CidProfileNumCISCO-VISM-ATM-TRUNK-MIB