All MIBs › CISCO-SUBSCRIBER-SESSION-MIB › csubJobFinishedReason
csubJobFinishedReason
Module: CISCO-SUBSCRIBER-SESSION-MIB
OID (symbolic): CISCO-SUBSCRIBER-SESSION-MIB::csubJobFinishedReason
OID (numeric): 1.3.6.1.4.1.9.9.786.1.3.7.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the reason why the system finished executing the subscriber session job:
'invalid' Indicates that the corresponding instance of csubJobState is either 'idle', 'pending', or 'inProgress'.
'other' Indicates that the system finished executing the subscriber session job abnormally for a reason not recognized by this MIB module.
'normal' Indicates that the system finished executing the subscriber session job with no problems.
'aborted' Indicates that the system finished executing the subscriber session job as the result of the EMS/NMS writing 'abort' to the corresponding instance of csubJobControl.
'insufficientResources' Indicates that the system finished executing the subscriber session job abnormally due to insufficient resources to continue.
'error' Indicates that the system encountered an error that prevented it from completing the job.
What is csubJobFinishedReason?
Reports why a subscriber session job finished (e.g., completed normally, aborted, or other reason), helping diagnose the outcome of a completed job.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.786.1.3.7.1.9 snmpwalk -v2c -c public <target> CISCO-SUBSCRIBER-SESSION-MIB::csubJobFinishedReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.786.1.3.7.1.9.1 snmpget -v2c -c public <target> CISCO-SUBSCRIBER-SESSION-MIB::csubJobFinishedReason.1
Start monitoring Cisco IOS/IOS-XE routers as ISG/NAS broadband access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SUBSCRIBER-SESSION-MIB::csubJobFinishedReason OID value, configure state conditions and alerts, and monitor any Cisco IOS/IOS-XE routers as ISG/NAS broadband access devices from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.786 | ciscoSubscriberSessionMIB | CISCO-SUBSCRIBER-SESSION-MIB |
| 1.3.6.1.4.1.9.9.786.1 | ciscoSubscriberSessionMIBObjects | CISCO-SUBSCRIBER-SESSION-MIB |
| 1.3.6.1.4.1.9.9.786.1.3 | csubJob | CISCO-SUBSCRIBER-SESSION-MIB |
| 1.3.6.1.4.1.9.9.786.1.3.7 | csubJobTable | CISCO-SUBSCRIBER-SESSION-MIB |
| 1.3.6.1.4.1.9.9.786.1.3.7.1 | csubJobEntry | CISCO-SUBSCRIBER-SESSION-MIB |
| 1.3.6.1.4.1.9.9.786.1.3.7.1.9 | csubJobFinishedReason | CISCO-SUBSCRIBER-SESSION-MIB |