CISCO-SSG-MIB :: cssgTcpRedirPortNoMapRowStat

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SSG-MIBcssgTcpRedirPortNoMapRowStat

cssgTcpRedirPortNoMapRowStat

Module: CISCO-SSG-MIB

OID (symbolic): CISCO-SSG-MIB::cssgTcpRedirPortNoMapRowStat

OID (numeric): 1.3.6.1.4.1.9.9.260.1.6.6.1.2

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-write

Description: The status of this table entry.

This object can also be used to create or delete conceptual row in this table.

To create a row, set this object to 'createAndGo'. cssgTcpRedirPortNo is a mandatory object for a create request.

To delete a row, set this object to 'destroy'.

What is cssgTcpRedirPortNoMapRowStat?

Controls creating or deleting the row that adds a specific port number, cssgTcpRedirPortNo, to a port group. cssgTcpRedirPortNo is explicitly called out as mandatory for a create request here, meaning this row-status object and the port-number object have to be set together in the same request to successfully add a new port to the group; setting the status alone without the port number fails. To add port 587 to the 'mail-ports' group, an admin's SNMP set would include both cssgTcpRedirPortNo=587 and cssgTcpRedirPortNoMapRowStat=createAndGo(4) in the same operation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.260.1.6.6.1.2
snmpwalk -v2c -c public <target> CISCO-SSG-MIB::cssgTcpRedirPortNoMapRowStat

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.260.1.6.6.1.2.1
snmpget -v2c -c public <target> CISCO-SSG-MIB::cssgTcpRedirPortNoMapRowStat.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.260.1.6.6.1.2.1 s <value>

Start monitoring Cisco broadband/edge routers (Service Selection Gateway) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SSG-MIB::cssgTcpRedirPortNoMapRowStat OID value, configure state conditions and alerts, and monitor any Cisco broadband/edge routers (Service Selection Gateway) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.260ciscoSsgMIBCISCO-SSG-MIB
1.3.6.1.4.1.9.9.260.1ciscoSsgMIBObjectsCISCO-SSG-MIB
1.3.6.1.4.1.9.9.260.1.6cssgTcpRedirectCISCO-SSG-MIB
1.3.6.1.4.1.9.9.260.1.6.6cssgTcpRedirPortNoMapTableCISCO-SSG-MIB
1.3.6.1.4.1.9.9.260.1.6.6.1cssgTcpRedirPortNoMapEntryCISCO-SSG-MIB
1.3.6.1.4.1.9.9.260.1.6.6.1.2cssgTcpRedirPortNoMapRowStatCISCO-SSG-MIB