CISCO-SCSI-FLOW-MIB :: ciscoScsiFlowSenseKeyIllReqErrs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SCSI-FLOW-MIBciscoScsiFlowSenseKeyIllReqErrs

ciscoScsiFlowSenseKeyIllReqErrs

Module: CISCO-SCSI-FLOW-MIB

OID (symbolic): CISCO-SCSI-FLOW-MIB::ciscoScsiFlowSenseKeyIllReqErrs

OID (numeric): 1.3.6.1.4.1.9.9.447.1.2.1.1.35

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: The number of ILLEGAL REQUEST SCSI SENSE key errors received on this LUN on this flow.

What is ciscoScsiFlowSenseKeyIllReqErrs?

This counter tracks ILLEGAL REQUEST SCSI SENSE key errors on this LUN/flow, meaning the target rejected a command because of a problem with the command itself, such as an invalid field or an unsupported operation, rather than a hardware or media fault. An admin seeing this climb on a flow should suspect a host-side software issue - a driver bug, an incompatible firmware/driver combination, or a misconfigured application issuing malformed SCSI commands - rather than a storage hardware problem. A newly upgraded HBA driver introducing illegal request errors on one host's flow while other hosts on the same array remain clean would point straight at that specific driver update.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.447.1.2.1.1.35
snmpwalk -v2c -c public <target> CISCO-SCSI-FLOW-MIB::ciscoScsiFlowSenseKeyIllReqErrs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.447.1.2.1.1.35.1
snmpget -v2c -c public <target> CISCO-SCSI-FLOW-MIB::ciscoScsiFlowSenseKeyIllReqErrs.1

Start monitoring Cisco MDS SAN switches/directors with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SCSI-FLOW-MIB::ciscoScsiFlowSenseKeyIllReqErrs OID value, configure state conditions and alerts, and monitor any Cisco MDS SAN switches/directors from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.447ciscoScsiFlowMIBCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1ciscoScsiFlowMIBObjectsCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1.2csfStatsCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1.2.1ciscoScsiFlowStatsTableCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1.2.1.1ciscoScsiFlowStatsEntryCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1.2.1.1.35ciscoScsiFlowSenseKeyIllReqErrsCISCO-SCSI-FLOW-MIB