CISCO-SCSI-FLOW-MIB :: ciscoScsiFlowIntrWwn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SCSI-FLOW-MIBciscoScsiFlowIntrWwn

ciscoScsiFlowIntrWwn

Module: CISCO-SCSI-FLOW-MIB

OID (symbolic): CISCO-SCSI-FLOW-MIB::ciscoScsiFlowIntrWwn

OID (numeric): 1.3.6.1.4.1.9.9.447.1.1.2.1.2

Node type: OBJECT-TYPE

Type: FcNameId

Access: read-write

Description: This object represents the pWWN of the Initiator in the flow. This object must be set to a valid value before or concurrently setting the corresponding instance of ciscoScsiFlowRowStatus object to 'active'.

What is ciscoScsiFlowIntrWwn?

This object holds the Fibre Channel port World Wide Name (pWWN) of the SCSI initiator (the host/server side) participating in this configured flow, and per the desc it must be set to a valid value before or at the same time the row's ciscoScsiFlowRowStatus is set to active. An admin configuring a new SAN acceleration flow between a specific host and storage array enters this value to identify exactly which initiator HBA the flow applies to. A real value here would look like a 16-hex-digit WWN such as 21:00:00:1b:32:0a:1f:c4 identifying a particular host's Fibre Channel adapter.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.447.1.1.2.1.2
snmpwalk -v2c -c public <target> CISCO-SCSI-FLOW-MIB::ciscoScsiFlowIntrWwn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.447.1.1.2.1.2.1
snmpget -v2c -c public <target> CISCO-SCSI-FLOW-MIB::ciscoScsiFlowIntrWwn.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.447.1.1.2.1.2.1 s <value>

Start monitoring Cisco MDS SAN switches/directors with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SCSI-FLOW-MIB::ciscoScsiFlowIntrWwn OID value, configure state conditions and alerts, and monitor any Cisco MDS SAN switches/directors from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.447ciscoScsiFlowMIBCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1ciscoScsiFlowMIBObjectsCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1.1csfConfigurationCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1.1.2ciscoScsiFlowTableCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1.1.2.1ciscoScsiFlowEntryCISCO-SCSI-FLOW-MIB
1.3.6.1.4.1.9.9.447.1.1.2.1.2ciscoScsiFlowIntrWwnCISCO-SCSI-FLOW-MIB