All MIBs › CISCO-OTV-MIB › cotvOverlayVpnDownReason
cotvOverlayVpnDownReason
Module: CISCO-OTV-MIB
OID (symbolic): CISCO-OTV-MIB::cotvOverlayVpnDownReason
OID (numeric): 1.3.6.1.4.1.9.9.810.1.2.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the reason why this Overlay Virtual Private Network is down.
'other' - Any other reason not covered by below enumerations
'configChange' - Configuration changed
'missingControlGroup' - Control Group information is unavailable
'missingDataGroupRange' - Data Group range information is unavailable
'misssingJoinOrSourceInterface' - Join or Source interface information is unavailable
'missingVpnName' - VPN name is unavailable
'missingJoinInterfaceAddr' - IP address is missing for Join Interface
'joinInterfaceDown' - Join Interface is down
'adminDown' - Overlay is administratively shutdown
'deleteHoldDown' - Overlay is in delete hold down phase
'reinit' - VPN is reinitializing
'missingSiteId' - Site ID information is unavailable
'siteIdMismatch' - Site ID mismatch has occurred
'missingSourceInterfaceAddr' - IP address is missing for Source Interface
'sourceInterfaceDown' - Source interface is down
'changingSiteId' - Changing site identifier
'changingControlGroup' - Changing control group
'missingDeviceId' - Device ID information is unavailable
'changingDeviceId' - Changing device ID
'cleanupInProgress' - Cleanup in progress
What is cotvOverlayVpnDownReason?
Read-only status value reporting why the OTV Overlay Virtual Private Network is currently down, such as a configuration change or a missing control group.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.810.1.2.1.1.4 snmpwalk -v2c -c public <target> CISCO-OTV-MIB::cotvOverlayVpnDownReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.810.1.2.1.1.4.1 snmpget -v2c -c public <target> CISCO-OTV-MIB::cotvOverlayVpnDownReason.1
Start monitoring Cisco data center switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OTV-MIB::cotvOverlayVpnDownReason OID value, configure state conditions and alerts, and monitor any Cisco data center switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.810 | ciscoOtvMIB | CISCO-OTV-MIB |
| 1.3.6.1.4.1.9.9.810.1 | ciscoOtvMIBObjects | CISCO-OTV-MIB |
| 1.3.6.1.4.1.9.9.810.1.2 | cotvOverlayObjects | CISCO-OTV-MIB |
| 1.3.6.1.4.1.9.9.810.1.2.1 | cotvOverlayTable | CISCO-OTV-MIB |
| 1.3.6.1.4.1.9.9.810.1.2.1.1 | cotvOverlayEntry | CISCO-OTV-MIB |
| 1.3.6.1.4.1.9.9.810.1.2.1.1.4 | cotvOverlayVpnDownReason | CISCO-OTV-MIB |