All MIBs › CISCO-NAC-NAD-MIB › cnnEouIfTimeoutGlobalConfig
cnnEouIfTimeoutGlobalConfig
Module: CISCO-NAC-NAD-MIB
OID (symbolic): CISCO-NAC-NAD-MIB::cnnEouIfTimeoutGlobalConfig
OID (numeric): 1.3.6.1.4.1.9.9.484.1.3.1.1.4
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This object indicates whether the timeout configurations on this interface are based on the corresponding global timeout configurations or not.
aaa(0) If this bit is set, the value of cnnEouIfTimeoutAAA is based on the value of cnnEouTimeoutAAA.
holdPeriod(1) If this bit is set, the value of cnnEouIfTimeoutHoldPeriod is based on the value of cnnEouTimeoutHoldPeriod.
retransmit(2) If this bit is set, the value of cnnEouIfTimeoutRetransmit is based on the value of cnnEouTimeoutRetransmit.
revalidation(3) If this bit is set, the value of cnnEouIfTimeoutRevalidation is based on the value of cnnEouTimeoutRevalidation.
statusQuery(4) If this bit is set, the value of cnnEouIfTimeoutStatusQuery is based on the value of cnnEouTimeoutStatusQuery.
maxRetry(5) If this bit is set, the value of cnnEouIfMaxRetry is based on the value of cnnEouMaxRetry.
clientless(6) If this bit is set, the value of cnnEouIfAllowClientless is based on the value of cnnEouAllowClientless.
ipStationId(7) If this bit is set, the value of cnnEouIfAllowIpStationId is based on the value of cnnEouAllowIpStationId.
If a bit is not set, the value of the corresponding object in the same conceptual row is not based on its corresponding global object.
If users configure object which is covered by cnnEouIfTimeoutGlobalConfig in the same conceptual row while the corresponding bit is set, the corresponding bit will be unset in order to reflect that such configuration is not from its corresponding global object.
What is cnnEouIfTimeoutGlobalConfig?
Indicates whether various EOU timeout settings on an interface (like the AAA timeout) follow the device's global timeout configuration rather than interface-specific values.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.484.1.3.1.1.4 snmpwalk -v2c -c public <target> CISCO-NAC-NAD-MIB::cnnEouIfTimeoutGlobalConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.484.1.3.1.1.4.1 snmpget -v2c -c public <target> CISCO-NAC-NAD-MIB::cnnEouIfTimeoutGlobalConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.484.1.3.1.1.4.1 s <value>
Start monitoring Cisco network access devices (switches/routers) enforcing NAC with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NAC-NAD-MIB::cnnEouIfTimeoutGlobalConfig OID value, configure state conditions and alerts, and monitor any Cisco network access devices (switches/routers) enforcing NAC from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.484 | ciscoNacNadMIB | CISCO-NAC-NAD-MIB |
| 1.3.6.1.4.1.9.9.484.1 | ciscoNacNadMIBObjects | CISCO-NAC-NAD-MIB |
| 1.3.6.1.4.1.9.9.484.1.3 | cnnEouIfMIBObjects | CISCO-NAC-NAD-MIB |
| 1.3.6.1.4.1.9.9.484.1.3.1 | cnnEouIfConfigTable | CISCO-NAC-NAD-MIB |
| 1.3.6.1.4.1.9.9.484.1.3.1.1 | cnnEouIfConfigEntry | CISCO-NAC-NAD-MIB |
| 1.3.6.1.4.1.9.9.484.1.3.1.1.4 | cnnEouIfTimeoutGlobalConfig | CISCO-NAC-NAD-MIB |